The MAG-TD200 computerized measuring system is designed to measure the dynamic magnetic properties of soft magnetic materials in both alternating and rotational fields. The system uses the following test circuits: Epstein frame, Single Sheet Tester, yoke for sample with dimensions of (280x30) mm as well as (100x100) mm and toroidal sample in alternating fields . There is also a possibility to use other test circuits according to customer's requests. In rotational field the measurement of magnetic[...]

The measuring device Franklin tester is designed to measure the insulation resistivity of coating according to the ASTM A717/ A717 M - 95 Standard. Microprocessor controlled power supply with bi-directional servomotor and electronic regulator of adjustments rate allows setting the specific pressure forces of measuring head (which contains 10 electrodes) on the tested object. The tested object is placed on the hot plate of the measuring table, which is pressed down to the measuring head as well[...]

The computerized measuring system designed to measure the resultant magnetic properties of the integrated samples made of the hard magnetic composites with both homogeneous and heterogeneous properties is the computer supported station ensuring a fully automated measuring process with tabular and graphic presentation of the obtained data. The usage of the measuring system resolves into the data input of measurement's and measuring head's parameters from the computer keyboard. The MAG-ST100[...]

Microprocessorized Instrument MP-100 is designed to dtermination of the Relative Magnetic Permeability of Non-magnetic Materials by Non-destructive Method. The MP-100 device is designed to measure the relative magnetic permeability in the range of : 1,0...3,0. for materials, details as well as finished products which are made of quasi non-magnetic materials. It is especially usefull in places where the power supply is inaccessible. Small size of detector allows to control the elements with small[...]

The device is assigned to heat the details and metallic bars consist of any steel (for example from acid-resisting steel) to the state, which allows any types of plastic processing (for example upsetting). The DB-1.01 heater characterizes especially high watt-hour efficiency (ca. 98%) thanks to suitable concentration of electromagnetic field in the heating zone of inductor. The high watt-hour efficiency is achieved due to automatic optimisation of supply conditions of circuit with consideration[...]